Guangdong Shunde Mingshi Chair Manufacturing Co., Ltd.
MS-235 Product Description
First, the product picture
Second, technical parameters:
1. Seat and back sponge: real material, high resilience, never deformed. High-density cold-foamed PU integrated foam molding, excellent sound absorption, sound insulation and resilience. The cotton density is 60 kg/m3 and the back density is 45 kg/m3.
2. Seat and back inner plate: It is formed by high-quality splint by die bending and has a thickness of 10 mm. The screws are fixed to the double-sided grasped watermelon nails and fixed, never falling off.
3, seat, back outer board: high-quality multi-layer board is cold-formed by mold, and then trimmed, polished, bottom oil sealed and refined environmentally friendly topcoat. The thickness is not less than 15mm.
4, armrest surface: made of imported oak, the thickness is not less than 26mm.
5, WordPad: “Concealed” Folding WordPad (configurable “post-mounted” folding tablet) can be stored in the armrest frame. The panel is made of high-density MDF and the board is labeled “Cold-pressure fireproof panel”. Around the PU edge, the thickness is 18mm.
6. Fabric: The seat and back material are made of special fabric, which is wear-resistant and does not fade. It can be used for flame retardant and anti-fouling. Manually sewed, high temperature resistant, low temperature resistant "strong environmentally friendly glue" stuck to the sponge, and then fixed by pulling the wire. The appearance is flat and does not wrinkle.
7. Cup/Beverage Holder: “Folding Cup Holder ” or “Cylinder Cup Holder” can be installed at the lower front end of the armrest, and “Cylinder Cup Holder” can be installed at the lower rear end of the armrest.
8. Side panel: The in- line side panel design is more stable and durable than the traditional outer button type . It adopts a high-quality high-density board with a thickness of 4mm or a 3mm thick PP board. The sponge and crepe are applied externally, and the touch is comfortable and soft.
9. Seat frame: Eliminate the traditional wooden frame on the market. It adopts high-quality cold-rolled steel plate with a thickness of 1.8mm. It is formed by stamping and welding. It is applied with five 3.8φ strong serpentine springs to make the seat bag have “sponge + spring”. Secondary rebound function, high cushioning, high rebound, sedentary and no fatigue.
10. Seat support: The support shaft of the seat bag is a cold-drawn round steel with a diameter of not less than 14mm. The seat bag on the foot of the stand is cold-rolled steel with a thickness of not less than 4mm and is welded and strengthened.
11, bracket, armrest side frame: 2mm high-quality cold-rolled steel stamping and folding forming, bearing iron bearing capacity, anti-bending function. All hardware parts are processed by grinding, polishing, descaling, phosphating, electrostatic powder spraying, high temperature furnace. Guarantee salt spray for 400 hours or salt bath for 100 hours, paint film corrosion resistance test does not rust, paint film adhesion exceeds two levels.
12, the connection angle: the back and the station foot "connection corner code" to strengthen the M-shaped overall structure, thickness 3mm.
13. Foot sole: It has been treated with [enhanced lacing] (with patent) to double the bearing capacity of the seat's "most deformable part" (see the comparison chart below).
14. Base hanging code: The fixed hanging code of the base is cold-rolled steel, the thickness is 4mm, firm and strong.
15. Station foot: It can be configured with the foot plate foot of the [reinforced lacing] treatment, and can also be equipped with the patented design of the lacing and the dustproof cover [three holes fixed type] standing, grasping The ground is stronger, the stability is better, the shape is more beautiful, and it is more suitable for sanitation (see the right picture below).
16, seat recovery: torsion spring and damper (slow return) device, returning light, durable, zero noise.
Third, the honorary certificate