Guangdong Shunde Mingshi Chair Manufacturing Co., Ltd.
MS-233 Product Description
First, the product picture
Second, technical parameters:
1. Seat and back sponge: real material, high resilience, never deformed. High-density cold-foamed PU integrated foam molding, excellent sound absorption, sound insulation and resilience. The cotton density is 60 kg/m3 and the back density is 45 kg/m3.
2, seat, back inner plate: the use of 10mm thick high quality plywood through the mold bending and forming. The screws are fixed to the double-sided grasped watermelon nails and fixed, never falling off.
3, seat, back outer panel: 15mm thick high-quality multi-layer board is cold-formed by mold, multi-layer bottom oil seal, effectively prevent cracking, environmentally friendly topcoat fine finish.
4, armrest surface: made of imported oak, the thickness is not less than 26mm.
5, front sealing plaque: the front side is equipped with oak "front sealing plaque", which is more luxurious and luxurious.
6. Wordboard: Built-in (post-mounted) folding writing board structure, the panel is made of high-density MDF, external cold-pressed fireproof panel, surrounded by PU edge, thickness is 18mm.
7. Fabric: The seat and back material are made of special fabric, which is wear-resistant and does not fade. It can be used for flame retardant and anti-fouling. Artificially sewed, high temperature resistant, low temperature resistant "strong environmentally friendly glue" stuck to the sponge. The appearance is flat and does not wrinkle.
8. Cup/Beverage Holder: “Folding Cup Holder ” or “Cylinder Cup Holder” can be installed at the lower front end (or lower rear end) of the armrest.
9. Side panel: The in- line side panel design (as shown in the left figure below) is more stable and durable than the traditional outer button type. It is made of high-quality high-density board with a thickness of 4mm or a 3mm thick PP board. The sponge and crepe are applied externally, and the touch is comfortable and soft.
10. Seat frame: Eliminate the traditional wooden frame on the market. It adopts high-quality cold-rolled steel plate with thickness of 1.8mm. It is formed by stamping and welding. Five 3.8φ strong serpentine springs are applied to make the seat bag have “sponge + spring”. Secondary rebound function, high cushioning, high rebound, sedentary and no fatigue.
11. Seat support: The seat support shaft is a cold-drawn round steel with a diameter of not less than 14mm. The seat bag on the foot of the station is cold-rolled steel with a thickness of not less than 4mm and is welded and strengthened.
12, bracket, armrest side frame: large bracket side frame, more atmospheric. It is formed by 2mm thick high-quality cold-rolled steel stamping and hemming. It has the bearing capacity and anti-bending function of angle iron. All hardware parts are processed by grinding, polishing, descaling, phosphating, electrostatic powder spraying, high temperature furnace. Guarantee salt spray for 400 hours or salt bath for 100 hours, paint film corrosion resistance test does not rust, paint film adhesion exceeds two levels.
13. Connecting corner code: The back and the foot "connecting corner code" is to strengthen the M-shaped overall structure, and the thickness is not less than 3mm.
14. Foot bottom plate: Made [reinforced lacing] treatment (with patent) to double the bearing capacity of the seat's "most deformable part" (see the comparison chart below). It can be configured with the sole plate of the [reinforced lacing] treatment, and can also be equipped with the [three-hole fixed] station foot designed by our company, which has stronger grip and better stability (see the right picture below).
15. Station foot: The foot tube is formed by carbon dioxide welding with 80X40XT1.5 high quality square tube, and is processed by grinding, polishing, derusting, phosphating, electrostatic spraying, high temperature furnace.
16, seat recovery: torsion spring and damper (slow return) device, returning light, durable, zero noise.
Third, the honorary certificate