Guangdong Shunde Mingshi Chair Manufacturing Co., Ltd.
MS-202 Product Description
First, the product picture:
Second, technical parameters
1, seat, back sponge: real material, high resilience, never deformed . Using aluminum mold, with high-quality high-density foam materials PU foam cold shaping . The seat density is 60KG/M3 and the back density is 45KG/M3. With insulation, heat insulation, sound absorption, shock absorption, anti-static, good ventilation and so on.
2. Seat and back outer board: The high-quality multi-layer board is cold-formed by the mold, and the multi-layer bottom oil seals, effectively preventing cracking, and the environmentally-friendly topcoat is finely finished. The thickness is not less than 15mm.
3, armrest surface: made of imported oak, the thickness is 26mm.
4. Fabric: The seat and back material are made of special fabric, which is wear-resistant and does not fade. Can be used for flame retardant and antifouling. Artificially sewed, high temperature resistant, low temperature resistant "strong environmentally friendly glue" adhered to the sponge, the appearance is flat and does not wrinkle.
5, WordPad: "Flip" Folding WordPad (configurable "post-mounted" folding writing board), the panel is ABS composite material once formed by the mold, the thickness is 15mm.
6, side panels: the use of high-quality T10.0 splint and T5 MDF pressed by the mold, wrapped sponge
And high quality fabric, the appearance is full and beautiful.
7, return function: the seat is spring and steel frame return structure, no faults, durable, fast and effective.
8, the holder, the armrest side frame: using 2mm high-quality cold-rolled steel stamping . All hardware parts are processed by grinding, polishing, descaling, phosphating, electrostatic powder spraying, high temperature furnace. Guarantee salt spray for 400 hours or salt bath for 100 hours, paint film corrosion resistance test does not rust, paint film adhesion exceeds two levels.
9. Seat frame: Eliminate the traditional wooden frame on the market. It adopts high-quality cold-rolled steel plate with a thickness of 1.8mm. It is formed by stamping and welding. It is applied with five 3.8φ strong serpentine springs to make the seat bag have “sponge + spring”. Secondary rebound function, high cushioning, high rebound, sedentary and no fatigue .
10, cup / drink holder: can be installed at the lower rear end of the armrest "cylinder cup holder" or "folded square cup holder".
11, the back and the foot connection corner code: to strengthen the M-shaped overall structure, thickness 3mm, strong and powerful.
12, the base hanging code: the base fixed hanging code is cold-rolled steel, the thickness is not less than 4mm, firm and strong.
13. Foot sole: It has been treated with [enhanced lacing] (with patent) to double the bearing capacity of the seat, which is the most deformable and damaged (see the comparison chart below).
14. Standing feet: The foot tube is formed by carbon dioxide welding with 80X40XT1.5 high quality square tube, and is processed by grinding, polishing, derusting, phosphating, electrostatic spraying, high temperature furnace. It can be configured with the foot plate foot of the [reinforced lacing] treatment, and can also be equipped with the patented design of the lacing and the dust-proof cover [three-hole fixed] station foot, which has stronger grip. It has better stability, a more beautiful appearance, and is more hygienic (see the image to the right below).
15, seat recovery: torsion spring and damper (slow return) device, return to light, durable, zero noise.
Third, the honorary certificate